Fuel Tanker Truck Tank Level Gauge DC12 - 24V Power 1 - 3 Meter Measuring Range
Tank truck Liquid Level Meter
Oil Tanker Liquid Level Meter consist of magnetostrictive ATG probe (with stainless steel sleeve) and explosion- proof liquid level meter display and other install attachment .From the top of tank car manhole finished the probe installation , and the battery power can supply the power directly . Fit the explosion-proof liquid level meter display and vehicle-mounted tanker together, the liquid level meter data will reach to tanker system by the single lines.
1. vehicle-mounted level meter probe
● Model: SYW-A
● Installation : Flange installation
● Installation dimensions:DN80 DN100
● Power Supply : DC12~30V
● Measurement Accuracy : ±0.5mm
● Electronic Bay:100mm
● 304 stainless steel sleeve,both bottom and top need make the single hole
● Floater material :one stainless steel floater,one plastic floater
2,Explosion-proof level meter displayer
● Can control 1-2 oil bunker at the same time ,with explosion-proof cage ,low temperature resistant (-40℃)
● It can real-time display the oil level ,temperature ,and oil tank volume
● With dynamic columnar graphically display the change of oil level change ,and keys operation
● Tank volume inset point by point ,the memory card support computer introduction
● It can built-in GSM short message module,When the liquid level falls continuously,send message to remind.
● Set aside one RS-232 communication port
Liquid Level Meter Console Performance Indicators
| Power Supply | DC12~30V |
| Work temperature/ Humidity | -40℃~60℃/20％~85％ |
| Display | OLED display |
| Guard Grating | Power guard grating Communication guard grating |
| Boundary Dimension | 118x100mm |
| Show/input mode | Chinese/English, columnar graphics |
| Automatic monitoring | Can simultaneous monitoring 1-2 oil tank parameters |
| Autoweighing | Real-time display, temperature, oil level vacancy volume, columnar dynamic graphical display oil level changes |
| Tank Capacity Table Editor | built-in memory card ,can make the copy from the computer to tank capacity table ,then use it directly |
| Port | Set aside one RS-232 communication port |
The standard configuration details
| category | name | model | quantity | remark |
| Product | Magnetostrictive probe | SYW-A | 1 | DN80flange installation |
| stainless protecting jacket | 304 | 1 | according the tank size to make the oil hole at up and down place |
| Explosion-proof level meter displayer | GH-XC-2 | 1 | OLED displayer,low temperature resistant (-40℃) ,can display level meter,temperature,volume,communication state.Set aside one RS-232 communication port |
| attachment | Explosion-proof hose | DN20 | 2 | Connect level meter displayer |
| IIB IIC e DIP | DN20 | 1 | Connect level meter probe |
| Upload data line | | 1 | Connect tanker |
| Bolt,ground lead and so on | | 1 | |
| | | | |
Installation Picture for vehicle-mounted level meter
